Announcement

Collapse
No announcement yet.

Project 93 GS300 5 speed

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Re: Project 93 GS300 5 speed

    From what I've tried, with this blue tooth OBD2 dongle it won't connect to the ecu at all unless I had access to tell it to follow the certain JOBD protocol. I know its wired correctly, or I would be getting errors and unable to connect. Also, it seems to readily read the information its pulling from the ecu, throttle %, O2 voltages, water temperature, map sensor voltage, etc.. I am also able to retrieve fault codes and clear them. I'm getting a bunch of transmission codes but that's because I have no automatic transmission, and the only other code to note is a vehicle speed sensor.

    Comment

    Working...
    X